Plant-Assisted Synthesis of Ag-Based Nanoparticles on Cotton: Antimicrobial and Cytotoxicity Studies.

The syntheses of Ag-based nanoparticles (NPs) with the assistance of plant extracts have been shown to be environmentally benign and cost-effective alternatives to conventional chemical syntheses. This study discusses the application of Paliurus spina-christi, Juglans regia, Humulus lupulus, and Sambucus nigra leaf extracts for in situ synthesis of Ag-based NPs on cotton fabric modified with citric acid. The presence of NPs with an average size ranging from 57 to 99 nm on the fiber surface was confirmed by FESEM. XPS analysis indicated that metallic (Ag0) and/or ionic silver (Ag2O and AgO) appeared on the surface of the modified cotton. The chemical composition, size, shape, and amounts of synthesized NPs were strongly dependent on the applied plant extract. All fabricated nanocomposites exhibited excellent antifungal activity against yeast Candida albicans. Antibacterial activity was significantly stronger against Gram-positive bacteria Staphylococcus aureus than Gram-negative bacteria Escherichia coli. In addition, 99% of silver was retained on the samples after 24 h of contact with physiological saline solution, implying a high stability of nanoparticles. Cytotoxic activity towards HaCaT and MRC5 cells was only observed for the sample synthetized in the presence of H. lupulus extract. Excellent antimicrobial activity and non-cytotoxicity make the developed composites efficient candidates for medicinal applications.

Cornstarch aerogels with thymol, citronellol, carvacrol, and eugenol prepared by supercritical CO2- assisted techniques for potential biomedical applications.

This study focuses on the development of bioactive materials using environmentally friendly techniques, renewable, biocompatible, and biodegradable polysaccharide, as well as natural bioactive compounds (NBCs) found in plant extracts. First, cornstarch aerogels with a porosity of 86 % and a specific surface area of 225 m2/g were produced via supercritical CO2- assisted drying. Further, thymol, citronellol, carvacrol, and eugenol were incorporated into the aerogels by supercritical CO2- assisted impregnation, which allowed variation in loadings of NBCs (12.8-17.6 %). Interaction between cornstarch aerogels and NBCs determined impregnation rate, pore wall thickness (in the range 18-95 nm), liquid absorption capacity (from 265 to 569 %), dehydration mass loss, and release in phosphate-buffered saline. Controlled release of NBCs was maintained over a 3-day period. Moreover, impregnated aerogels showed a significant antioxidant effect with the highest value for DPPH radical inhibition of 25.5 % determined for the aerogels impregnated with eugenol. Notable antimicrobial activity against tested Gram-negative bacteria, Gram-positive bacteria, and fungi was also observed, being the highest for thymol-loaded aerogel with the diameter of the inhibition zones of up to 37.5 mm. This work shows a promising green approach for the production of bioactive two-component starch-based materials for potential applications in skin infection treatment.

Eco-friendly dyeing of polyamide and polyamide-elastane knits with living bacterial cultures of two Streptomyces sp. strains.

Given the environmental burden of textile industry, especially of dyeing processes and the volume of synthetic dyes and surfactants, the intensive development of the greener approaches is under way. Herein, an environmentaly-friendly dyeing of polyamide (PA) and PA/Elastane (PA/EA) knits using live bacterial approach in water environment, completely eliminating usage of textile auxiliaries is described. A total of 12 pigment-producing Streptomyces strains were isolated and purified from soil and rizoshere or bark of smoke tree Cotinus coggygria samples. The antibacterial, antifungal and cytotoxic effects of crude bacterial extracts were tested. Antimicrobial effect was obtained by the majority of extracts but only two streptomycetes extracts, 11-5 and BPS51, showed moderate cytotoxicity against HaCaT human cell line. This was the reason to select 11-5 and BPS51 strains for the dyeing of the textile materials. Excellent properties of dyeing wool, silk and PA are achieved initially using live cultures, and the bioprocess is optimized on commercial PA and PA/EA knits used for stockings production. Satisfactory coloration of both knits is achieved with dynamic conditions (culture shaking at 180 rpm over 5-14 days at 30 ºC) giving the best coloration results, except in the case of the PA sample dyed with a bacterial strain 11-5. The prolongation of dyeing time leads to higher color yields independently of fabric and bacteria strain. Although the color differences between the samples before and after washing are observed, washing fastness after three washing cycles can be considered as satisfactory.

Antibacterial Bio-Nanocomposite Textile Material Produced from Natural Resources.

Growing demand for sustainable and green technologies has turned industries and research toward the more efficient utilization of natural and renewable resources. In an effort to tackle this issue, we developed an antibacterial textile nanocomposite material based on cotton and peat fibers with immobilized Cu-based nanostructures. In order to overcome poor wettability and affinity for Cu2+-ions, the substrate was activated by corona discharge and coated with the biopolymer chitosan before the in situ synthesis of nanostructures. Field emission scanning electron microscopy (FESEM) images show that the application of gallic or ascorbic acid as green reducing agents resulted in the formation of Cu-based nanosheets and mostly spherical nanoparticles, respectively. X-ray photoelectron spectroscopy (XPS) analysis revealed that the formed nanostructures consisted of Cu2O and CuO. A higher-concentration precursor solution led to higher copper content in the nanocomposites, independent of the reducing agent and chitosan deacetylation degree. Most of the synthesized nanocomposites provided maximum reduction of the bacteria Escherichia coli and Staphylococcus aureus. A combined modification using chitosan with a higher deacetylation degree, a 1 mM solution of CuSO4 solution, and gallic acid resulted in an optimal textile nanocomposite with strong antibacterial activity and moderate Cu2+-ion release in physiological solutions. Finally, the Cu-based nanostructures partially suppressed the biodegradation of the textile nanocomposite in soil.

Supercritical CO2 - assisted production of PLA and PLGA foams for controlled thymol release.

Amorphous, medical grade poly(d,l-lactic acid) (PLA) and poly(d,l-lactic-co-glycolic acid) (PLGA) were used to develop systems for controlled release of a natural bioactive substance - thymol. Supercritical carbon dioxide (scCO2) was successfully used both as an impregnation medium for thymol incorporation into the polymer matrix and a foaming agent in a single-step batch process. Impregnation of samples using low to moderate scCO2 densities (273 kg/m3 and 630 kg/m3) and short processing times (2 h and 4 h) enabled thymol loading of 0.92%-6.62% and formation of microcellular foams upon system depressurization. Thymol effect on structural and thermal properties on foamed samples was proven by FTIR and DSC. The effect of CO2 under elevated pressure on the neat polymers was analysed by high pressure DSC. Foaming of polymers with lower molecular weight by CO2 of higher density yielded foams with smaller pores. All tested foams released thymol in a controlled manner in phosphate buffered saline (PBS) at 37 °C within 3 to 6 weeks. Higher loading and lower cell density favoured thymol release rate, while its concentration in PBS for the tested period depended on foam interaction with the medium. Representative PLGA foam sample with the highest thymol loading (6.62%) showed controlled thymol release within 72 h in mediums having pH values from 1.1 to 7.4.

Antibacterial activity of Cu-based nanoparticles synthesized on the cotton fabrics modified with polycarboxylic acids.

The fabrication of antimicrobial textile nanocomposite by in situ synthesis of Cu-based nanoparticles on cotton fabrics modified with different polycarboxylic acids was discussed in this study. In order to evaluate the influence of carboxyl group content on Cu2+-ions adsorption, their subsequent reduction with sodium borohydride and formation of Cu-based nanoparticles, cotton fabrics were modified with succinic, citric and 1,2,3,4-butanetetracarboxylic acids. It was shown that the larger the number of carboxyl groups in applied acid, the larger the content of free carboxyl groups on the fibers and consequently, the larger the Cu2+-ions uptake and total amounts of Cu-based nanoparticles. On the basis of the XPS and XRD measurements, it was suggested that synthesized nanoparticles were mixture of Cu2O and CuO. Fabricated nanocomposites provided maximum reduction of Gram-negative bacterium E. coli and Gram-positive bacterium S. aureus and controlled release of Cu2+-ions in physiological saline solution which are necessary prerequisites for infection prevention.

Application of cellulose acetate for controlled release of thymol.

Cellulose acetate (CA) was investigated as a carrier towards development of material with controlled release of thymol as a natural substance with strong antibacterial properties using high pressure techniques. Effect of thymol content on CA was confirmed by SEM, FTIR and DSC methods. Kinetic of thymol release from CA was tested using simulated gastric and intestinal fluids (hydrochloric acid and phosphate buffer saline). Results were correlated with Korsmeyer-Peppas and Weibull model. Depending on the thymol content and chemical nature of the release medium, the time of thymol release varied from one to three days indicating CA as a promising carrier of thymol with potential uses from medicine to agriculture. The impregnated CA showed antibacterial activity against 23 tested bacterial strains including methicillin-resistant Staphylococcus aureus (MRSA) which is particularly important bearing in mind that this strain causes fatal infections in humans and animals.

Sonophotocatalytic degradation of dye C.I. Acid Orange 7 by TiO2 and Ag nanoparticles immobilized on corona pretreated polypropylene non-woven fabric.

This study discusses the possibility of using corona pre-treated polypropylene (PP) non-woven fabric as a support for immobilization of colloidal TiO2 and Ag nanoparticles in order to remove dye C.I. Acid Orange 7 from aqueous solution. Dye removal efficiency by sonocatalysis, photocatalysis and sonophotocatalysis was evaluated on corona pre-treated fabric loaded with TiO2 nanoparticles, corona pre-treated fabric double loaded with TiO2 nanoparticles and corona pre-treated fabrics loaded with TiO2 nanoparticles before and after deposition of Ag nanoparticles. In addition, the stability of PP non-woven fabric during these processes was investigated. The substrates were characterized by SEM, EDX and AAS analyses. The change of the dye concentration was evaluated by UV-VIS spectrophotometry. Unlike sonocatalysis and photocatalysis, complete dye removal from both solution and non-woven fabric was obtained already after 240-270 min of sonophotocatalysis. Corona pre-treated PP non-woven fabric loaded with Ag nanoparticles prior to deposition of TiO2 nanoparticles provided excellent degradation efficiency and superior reusability. Sonophotocatalytic degradation of dye in the presence of all investigated samples was the most prominent in acidic conditions. Although this nanocomposite system ensured fast discoloration of dye solution, TOC values of water measured after sonophotocatalysis were not satisfactory because of PP degradation. Therefore, it is suggested to include TOC evaluation in each case study where different supports for TiO2 nanoparticles are used since these nanoparticles may guarantee the dye removal from solution but the stability of support could be problematic causing even more serious environmental impact.